The HP StorageWorks Rack-mount Kits provide a high density, rack-mountable tape drive and RDX removable disk drive solution for both direct-attach SCSI, USB, or SAS backup and archiving applications. The HP StorageWorks 1U Rack-mount Kit supports DAT and Ultrium internal tape drives, and RDX internal removable disk backup systems. The 1U rack-mount kit is available in SCSI, SAS and USB interfaces. With two Ultrium 1760 drives, the 1U SAS enclosure can provide a maximum compressed capacity of 3.2 TB with a data transfer rate up to 1,152 GB/hr. The HP StorageWorks 3U Rack-mount Kit holds up two full-height internal tape drives, four half-height internal tape drives, or a combination of one full height and two half tape drives. It is available in both SCSI and SAS interfaces. With four LTO-4 Ultrium 1760 SCSI drives this enclosure solution can provide a maximum compressed capacity of 6.4 TB.
Features
High density: The HP Rack-Mount Kits are ideal for customers who have limited space in their rack as it allows for a smaller footprint leaving valuable space for other key components in the Datacenter.
Scalability: The 1U rack enclosure can hold one single drive. One additional drive can be added when needed. The 3U rack enclosure can hold two full height drives, four half-height drives, or one full and two half-height drives.
Ability to mix technologies: The 1U and 3U Rack-mount Kits allow users to mix a variety of tape technologies, including DAT, Ultrium, and SDLT, as well as RDX removable disk technology
Supports standard internal tape and disk drives: The enclosures support standard internal tape drives and RDX removable disk backup systems. No extra module is needed.
RoHS compliant: The Rack-Mount Kits are all RoHS compliant (meets 2006 European legislation for removal of hazardous substances).
HP's WEEE registration number is WEE/EJ0076US
This means that HP is a registered producer under the Waste Electrical and Electronic Equipment Regulations 2007. Read more about recycling your old IT equipment
HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/reach.