Prejsť na obsah Slovensko-Slovensky
HP.sk Produkty a služby Podpora a ovládače Riešenia Možnosti nákupu
» Kontaktujte HP       alebo volajte 0800 147 147
HP.sk
Tape Enclosures and Arrays  >  Tape Enclosures and Arrays

HP StorageWorks Rack-mount Kits – prehľad

» 

Malé a stredné firmy

» Tape Enclosures and Arrays
»

Ponuky pre malé a stredné firmy

»

Prihlásiť sa na odber bulletinu eNewsletter

»

Nakupovať od partnera HP Preferred Partner

»

Podnikové služby

»

HP Renew program

Ďalšie informácie

»

Simply StorageWorks

»

Mapa lokality

Obsah začína tu
HP StorageWorks Rack-mount Kits - Tape Enclosures and Arrays
Zväčšiť obrázok
 | 





» Technická podpora / príručky
» Manuály / Technická špecifikácia

Príbuzné prepojenia

» Product Bulletin


» Modely

Prehľad

» Špecifikácie

» doplnky, príslušenstvo a ďalšie súčasti



Prehľad

The HP StorageWorks Rack-mount Kits provide a high density, rack-mountable tape drive and RDX removable disk drive solution for both direct-attach SCSI, USB, or SAS backup and archiving applications. The HP StorageWorks 1U Rack-mount Kit supports DAT and Ultrium internal tape drives, and RDX internal removable disk backup systems. The 1U rack-mount kit is available in SCSI, SAS and USB interfaces. With two Ultrium 1760 drives, the 1U SAS enclosure can provide a maximum compressed capacity of 3.2 TB with a data transfer rate up to 1,152 GB/hr. The HP StorageWorks 3U Rack-mount Kit holds up two full-height internal tape drives, four half-height internal tape drives, or a combination of one full height and two half tape drives. It is available in both SCSI and SAS interfaces. With four LTO-4 Ultrium 1760 SCSI drives this enclosure solution can provide a maximum compressed capacity of 6.4 TB.

Funkcie

High density: The HP Rack-Mount Kits are ideal for customers who have limited space in their rack as it allows for a smaller footprint leaving valuable space for other key components in the Datacenter.

Scalability: The 1U rack enclosure can hold one single drive. One additional drive can be added when needed. The 3U rack enclosure can hold two full height drives, four half-height drives, or one full and two half-height drives.

Ability to mix technologies: The 1U and 3U Rack-mount Kits allow users to mix a variety of tape technologies, including DAT, Ultrium, and SDLT, as well as RDX removable disk technology

Supports standard internal tape and disk drives: The enclosures support standard internal tape drives and RDX removable disk backup systems. No extra module is needed.

RoHS compliant: The Rack-Mount Kits are all RoHS compliant (meets 2006 European legislation for removal of hazardous substances).



Spoločnosť HP sa zaväzuje k poskytovaniu informácií svojim zákazníkom o chemických látkach v našich produktoch, tak ako je to nevyhnutné pre dosiahnutie súladu s právnymi požiadavkami, ako je napr. REACH (Nariadenie ES č. 1907/2006 Európskeho parlamentu a Rady). Správu s informáciami o chemických látkach v tomto produkte nájdete na lokalite: www.hp.com/go/reach.




Verzia pre tlač
Vyhlásenie o ochrane súkromia Používaním tejto stránky súhlasíte s jej podmienkami Kontaktujte správcu stránky
© 2009 Hewlett-Packard Development Company, L.P.