Salt la conţinut România-Română
pagina de pornire hp.com Produse şi servicii Asistenţă şi drivere Soluţii Opţiuni de cumpărare
» Contactaţi HP      
pagina de pornire hp.com
 Power Distribution Rack

HP Power Distribution Rack - Prezentare generală
» 

Firme mici şi mijlocii
» Power Distribution Rack
»

Abonaţi-vă la eNewsletter
»

Cumpăraţi de la un HP Preferred Partner
»

Hartă site
Conţinutul începe aici
HP Power Distribution Rack - Power Distribution Rack



» Asistenţă tehnică/Manuale
» Specificatii detaliate / Documente



Prezentare generală

» Specificaţii

» consumabile, accesorii şi altele


Prezentare generală

The HP Power Distribution Rack (PDR) improves power management in the data center by moving power distribution to the row level. Decentralizing power improves cable management, decreases diagnostic time for problems, and saves installation costs by reducing the size and number of long power feeds required to reach from large wall mounted distribution units. Housed in a single HP 10000 G2 42U rack, the PDR also saves floor space and allows you to move heat robbing transformers off of the data center floor improving cooling. Capable of delivering 400 amps redundantly, the HP PDR can power several high density racks with shorter cable runs than conventional site level power distribution systems. Fully redundant inputs and outputs provide dependable power while protecting valuable IT hardware with high quality circuit breakers. Individual branch circuit monitoring and redundant management modules provide the status and power consumption of each attached rack.

Caracteristici

• Fully redundant: Dual power paths from input to output, including dual management displays provide no single point of failure.
• High capacity: High amperage inputs allow redundant support of over twenty 5KW racks of equipment or over a dozen 8KW rack. A 60 amp maximum branch circuit size means that even extreme densities can be supported.
• Better cooling efficiency: Transformers, even in smaller capacity systems, can easily generate 10,000 BTUs. The transformer-less design of the HP PDR allows you move transformers off of the data center floor and the pre-configured whips reduce the amount of cable under a raise floor preventing air dams.

Trecere în revistă
Model Key features Cumpărare
HP Power Distribution Rack (AF515A)

HP şi-a luat angajamentul de a furniza clienţilor informaţii despre substanţele chimice din produsele sale, respectând cerinţe legale precum REACH (Regulamentul CE Nr. 1907/2006 al Parlamentului European şi al Consiliului). Un raport cu informaţii chimice pentru acest produs este disponibil la adresa: www.hp.com/go/reach.




Instrucţiuni de tipărire
Declaraţie de confidenţialitate Prin folosirea acestui site sunteţi de acord cu termenii lui de folosire Feedback către webmaster
© 2009 Hewlett-Packard Development Company, L.P.