8 MB (1 x 8 MB) Level 3 cache; 4 MB (1 x 4 MB) Level 3 cache
Processor front side bus
1333/1066/800 MHz Front Side Bus
Standard memory
6 GB (3 x 2 GB) Standard Memory UDIMMs
Memory
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Memory slots
16 DDR3 DIMM slots
Maximum memory
128 GB (16 x 8 GB) for Registered Memory configurations; 24 GB (12 x 2 GB) for Unbuffered Memory configurations
Internal drives
Internal drives
No hard disk drive in standard configuration
Hard disk drive speed
Not applicable
Internal mass storage
LFF 3.5" Hot Plug SATA: 8.0 TB (8 x 1 TB); LFF 3.5" Hot Plug SAS: 8.0 TB (8 x 1 TB); SFF 2.5" Hot Plug SAS: 4.8 TB (16 x 300 GB)
Flexible disk drive
Via USB only
Optical drives
DVD / CD drives via USB only
Storage controller
HP Embedded SATA RAID Controller (RAID 0, 1, 10) per server node; NOTE: Transfer rate: 3.0 Gb/s SATA; NOTE: A HP Smart Array Controller is required for SAS HDD and/or hot-plug HDD support. Transfer rate: 6.0 Gb/s SAS supported; NOTE: When adding a Smart Array Controller to an 8LFF SAS HDD configuration, a HP h1000 LFF SAS CONTROLLER CABLE OPTION KIT (P/N 519503-B21) must be ordered to connect the Smart Array Controller to the hard drive backplane. When a controller is added during a CTO buildup, the appropriate cables are included and this kit is not required. This cable kit is only needed for BTO configurations or if a CTO customer upgrades to a Smart Array Controller after initial purchase.
NOTE: When adding a Smart Array Controller to an 16SFF SAS HDD configuration, a HP h1000 SFF SAS CONTROLLER CABLE OPTION KIT (P/N 519507-B21) must be ordered to connect the Smart Array Controller to the hard drive backplane. When a controller is added during a CTO buildup, the appropriate cables are included and this kit is not required. This cable kit is only needed if a CTO customer upgrades to a Smart Array Controller after initial purchase; NOTE: An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD.
Expansion slots
Half Height Nodes (1U): One available PCI Express Gen 2.0 slots: (standard on 4-node BTO model): Slot 1: Low profile PCI-Express 2.0 x16; Full Height Nodes (2U): three available riser options; Option 1: Up to three available PCI-Express Gen 2.0 slots: Slot 1: full-length/full-height PCI-Express 2.0 x16; Slot 2: full-length/half-height PCI-Express 2.0 x4; Slot 3: low-profile PCI-Express 2.0 x4; Option 2: Up to three available PCI-Express Gen 2.0 slots: Slot 1: full-length/full-height PCI-Express 2.0 x8; Slot 2: full-length/half-height PCI-Express 2.0 x8; Slot 3: low-profile PCI-Express 2.0 x8; Option 3: Up to two available PCI-Express Gen 2.0 slots: (standard on 2-node BTO model); Slot 1: full-length/full-height PCI-Express 2.0 x16; Slot 2: low-profile PCI-Express 2.0 x8
System features
Form factor
HP ProLiant h1000 G6 Chassis - 2U; HP ProLiant DL170h Server - Half-width server node
Power features
HP has a new design for ProLiant power- the new Common Slot Power Supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with Common Slot, High Efficiency and Right-Size Power Supplies. The new HP Common Slot power supplies are designed for the highest power efficiency without degrading performance of the ProLiant server. Power Supplies have efficiency ratings up to 92%. There are three Right Size power options available depending on the configuration of your server. To make sure you select the correct power supply to meet your configuration, please use the HP Power Advisor at www.hp.com/go/proliant-energy-efficient" or www.hp.com/go/hppoweradvisor. All HP Common Slot power sources are UL, CE Mark Compliant, Hot Plug and Redundant.
External I/O ports
Network RJ-45(Ethernet) - 2 10/100/1000 NIC ports (1 NIC shared for the HP ProLiant Lights Out 100i Remote Management); Serial - 1; Graphics - 1; USB - 3 (two rear, one internal); Management - 1 Optional Dedicated LO100i Management Port; Health LED - 1 rear per server node (Optional front health LED per server node); Power - 1 rear per server node (Optional front power button per server node); UID - 1 rear per server node (Optional front UID per chassis)
Network interface
HP NC362i Integrated Dual Port Gigabit Server Adapter with support for iSCSI
Compatible operating systems
Microsoft® Windows® Server; Microsoft® Windows® Server Hyper-V; Red Hat Enterprise Linux (RHEL); SUSE Linux Enterprise Server (SLES); Solaris 10 for x86/x64 based Systems; VMware; Citrix Essentials for XenServer
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Serviceability
ProLiant 100 series Server Set-up and Deployment software tools: The HP ProLiant Easy Set-up CDs and ISO image downloads offer Assisted and Manual single server installation, setup, and deployment capability. Capabilities provided are: AutoRun; Assisted Installation Microsoft Windows 2003 Server and Microsoft Windows 2008 Server; OS and SW available for Manual Installation are listed on each servers' QuickSpecs; Array Configuration Utility (ACU); Array Diagnostics Utility (ADU); HP Insight Diagnostics; Smart Components - self-executable software consisting of drivers; HP Smart Update Manager - a single system and multi-server deployment tool for Windows environments that works with Smart Components to provide customers with easy-to-use GUI and Script-based deployment capacity; SmartStart Scripting Toolkit - an automated scalable deployment utility
Product dimensions (W x D x H)
44.81 x 73.43 x 8.74 cm
Product weight
35.4 kg
Warranty
1 year Parts, 1 year labor, and 1 year on-site service
2.00 GHz 2 processors No hard disk drive in standard configuration DDR3 Unbuffered (UDIMM) 6 GB (3 x 2 GB) Standard Memory 24 GB (12 x 2 GB) for Unbuffered Memory configurations HP ProLiant h1000 G6 Chassis - 2U; HP ProLiant DL170h Server - Half-width server node
HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/reach.
Printable version
