 |
» |
|
|
|
|
|
|
|
|
|
|
|
Overview
|
|
|
HP ProCurve M110 Access Point is an entry-level, single IEEE 802.11a/b/g radio device that can be configured to operate as an access point, a wireless distribution system (WDS) bridge, or a full-spectrum IEEE 802.11 wireless LAN (WLAN) monitor. The ProCurve M110 Access Point supports up to two Virtual Service Communities, each with independent VLAN and wireless security profiles. It is Plenum rated and powered by IEEE 802.3af-compliant Power over Ethernet (PoE). The M110 access point is Wi-Fi Certified for WPA2, WPA, and WEP security and has hardware assisted AES and RC4 encryption.
Features
|
|
|
| • |
Enhanced security: Configurable Ethernet MAC and protocol filters WPA2, WPA, and WEP; IEEE 802.1X PEAP WLAN authentication Hardware-assisted AES and RC4 encryption |
| • |
Location flexibility: 100 mW radio and antenna diversity provide excellent range; Configurable IEEE 802.11 a/b/g radio with external antenna connectors; Plenum rated; Centrally manageable as part of the ProCurve Intelligent Mobility system |
|
| HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/reach. |
|
|
Printable version
