 |
» |
|
|
|
|
|
|
|
|
|
|
|
Ülevaade
|
|
|
The ProCurve 3400cl Switch series consists of exceptionally affordable 24- and 48-port 10/100/1000 intelligent edge stackables with optional 10-Gigabit uplinks and stacking capability. Created in response to the growing need for network capacity in a world where high-demand applications are becoming common, these standards-based Layer 3 switches provide outstanding performance, traffic management, and access control capabilities. The result is an efficient, secure, high-throughput, multi-service network that is able to handle the demands of today's applications as well as those that will emerge in the future. Requires ProCurve Switch cl 10-GbE Media Flex Module (J8435A)
Tehnilised parameetrid
|
|
|
| • |
Dual-personality functionality: four 10/100/1000 ports or mini-GBIC slots for optional fiber connectivity such as Gigabit-SX, -LX, or -LH |
| • |
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports |
| • |
88 Gbps backplane with 64 million pps (HP ProCurve 3400cl-24G) and 136 Gbps backplane with 99.5 million pps (HP ProCurve 3400cl-48G): up to ten times the bandwidth for low-latency throughput |
| • |
Selectable queuing configurations: increase performance by selecting the queuing configuration that best meets the requirements of network applications |
| • |
Selectable queuing configurations: increase performance by selecting the queuing configuration that best meets the requirements of network applications |
Resiliency and high availability
| • |
Router redundancy (XRRP): allows groups of two routers to dynamically back each other up to create highly available routed environments |
| • |
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking: support up to 25 trunks, each with up to 8 links (ports) per trunk |
| • |
IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees |
| • |
IEEE 802.1w Rapid Convergence Spanning Tree Protocol: increases network uptime through faster recovery from failed links |
| • |
Optional redundant power supply: provides uninterrupted power (provided by ProCurve 600 RPS/EPS) |
| • |
ProCurve switch meshing: dynamically load-balances across multiple active redundant links to increase available aggregate bandwidth |
| • |
VLAN support and tagging: support complete IEEE 802.1Q (4,096 VLAN IDs) and 256 VLANs simultaneously |
| • |
Group VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs |
| • |
IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs |
| • |
Layer 3 IP routing: provides routing of IP at media speed; supports static routes, RIP, RIPv2, and OSPF |
| • |
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number |
| • |
Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator |
| • |
Source-port filtering: allows only specified ports to communicate with each other |
| • |
TACACS+: eases switch management security administration by using a password authentication server |
| • |
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks |
| • |
IP multicast routing (PIM Dense): routes IP multicast traffic using the PIM Dense routing protocol |
| • |
IP multicast snooping and data-driven IGMP: automatically prevents flooding of IP multicast traffic |
|
| HP on pühendunud pakkuma oma klientidele infot oma toodetes esinevate keemiliste ainete kohta, et järgida juriidilisi nõudeid, nagu REACH (Euroopa Parlamendi ja nõukogu määrus (EÜ) nr 1907/2006). Selle toote kohta käiv keemilise teabe raport on saadaval aadressil: www.hp.com/go/reach. |
|
|
Trükiversioon
