Ga naar inhoud Belgiƫ-Nederlands
hp.com home producten en diensten ondersteuning en drivers oplossingen Koopopties
» Contacteer ons      
hp.com home
Tape Enclosures and Arrays  >  Tape Enclosures and Arrays

HP StorageWorks Rack-mount Kits - overzicht en kenmerken

» 

Kleine en middelgrote ondernemingen (KMO)

» Tape Enclosures and Arrays
»

Hot Offers

»

Abonneren op eNewsletter

»

Kopen van een HP Preferred Partner

»

Bedrijfsdiensten

»

Remanufactured HP Renew producten

Oplossingen en Expertisecentra

»

Simply StorageWorks

»

Site Map

inhoud start hier
HP StorageWorks Rack-mount Kits - Tape Enclosures and Arrays
Afbeelding vergroten
 | 






» Technische ondersteuning / Handleidingen
» Datasheets / Documenten


Extra informatie

» Product Bulletin


» Modellen

Overzicht

» Specificaties

» supplies, accessoires en overig



Overzicht

The HP StorageWorks Rack-mount Kits provide a high density, rack-mountable tape drive and RDX removable disk drive solution for both direct-attach SCSI, USB, or SAS backup and archiving applications. The HP StorageWorks 1U Rack-mount Kit supports DAT and Ultrium internal tape drives, and RDX internal removable disk backup systems. The 1U rack-mount kit is available in SCSI, SAS and USB interfaces. With two Ultrium 1760 drives, the 1U SAS enclosure can provide a maximum compressed capacity of 3.2 TB with a data transfer rate up to 1,152 GB/hr. The HP StorageWorks 3U Rack-mount Kit holds up two full-height internal tape drives, four half-height internal tape drives, or a combination of one full height and two half tape drives. It is available in both SCSI and SAS interfaces. With four LTO-4 Ultrium 1760 SCSI drives this enclosure solution can provide a maximum compressed capacity of 6.4 TB.

Kenmerken

High density: The HP Rack-Mount Kits are ideal for customers who have limited space in their rack as it allows for a smaller footprint leaving valuable space for other key components in the Datacenter.

Scalability: The 1U rack enclosure can hold one single drive. One additional drive can be added when needed. The 3U rack enclosure can hold two full height drives, four half-height drives, or one full and two half-height drives.

Ability to mix technologies: The 1U and 3U Rack-mount Kits allow users to mix a variety of tape technologies, including DAT, Ultrium, and SDLT, as well as RDX removable disk technology

Supports standard internal tape and disk drives: The enclosures support standard internal tape drives and RDX removable disk backup systems. No extra module is needed.

RoHS compliant: The Rack-Mount Kits are all RoHS compliant (meets 2006 European legislation for removal of hazardous substances).



Het beleid van HP is erop gericht om klanten informatie te verstrekken over de chemische stoffen die zich in de producten bevinden, in overeenstemming met wettelijke verplichtingen zoals REACH (Verordening (EG) nr. 1907/2006 van het Europees Parlement en de Raad). Een rapport met chemische informatie voor dit apparaat vindt u op: www.hp.com/go/reach.




Printversie
Privacyverklaring Het gebruik van deze site betekent dat u instemt met de voorwaarden Feedback aan webmaster
© 2009 Hewlett-Packard Development Company, L.P.